White Retro Riser - 7-3/4 in x 48 in

SKU
RIZP14-48
$19.66 ea
White Riser (Retro style), 1/4 in nominal (3/16" actual) x 7 3/4 in x 48 in length.
For delivery on 04/02/2024, order this item in the next

Colors shown vary between different devices -
Start your project with a sample pack to pick the right color for your stair remodeling project »»

Note: All real wood exotic species change color greatly over time and may vary in color significantly. Check out our blog post on ambering for more information »

White risers are a beautiful and economical addition to any staircase. They are especially popular in homes with other white trim and molding. White risers are also a great way to lighten a dark staircase or provide definition between steps.
When ordering risers, you'll typically order the same length as the tread. These retro risers are designed to reface an existing riser while being thin enough not to offset your new retro treads past any existing skirtboard.
Our white retro risers are shipped with an anti-scuff laminate on the surface and are ready to install. Standard riser dimensions are 1/4" nominal (3/16" actual) thick by 7-3/4" tall by 48" long.

Product Note: There may be some minor chipping of the white coating which occurs during transit. This is normal and is intended to be trimmed during installation since the risers are oversized for most applications.
Installation Note: Latex paint will not adhere to the coating on the retro risers - if painting the retro risers, additional prep work will be required.

These risers are designed to be used with our Retro stair treads as part of the complete staircase remodeling system
ColorWhite
Unit Of Measureea
Width7-3/4 in
Length48 in
PrefinishedNo
ProfileRetro Riser
Thickness1/4 in
Wood SpeciesPaint Grade (may vary)
Quickship ItemYes
Your Rating
Product Questions and Answers
  1. Q:When using a white riser with a Maple tread do you use a white or maple cove moulding. Stair case is 15 steps high so a lot will be visible
    A:The Cove Moulding should be the same species as the tread, and not the riser. If you have Maple Treads, you will want to order the Maple Cove Moulding.
  2. Q:Is the riser flexable enough to go around the rounded ends of the starting step?
    A:These risers are not flexible enough to wrap around the starter step. Below is a link to the Starter Step Risers, which sounds like what you will need. Starter Step Risers: http://www.stair-treads.com/url/wc
  3. Q:Are these "retroriser" manfactured by Young?
    A:No, we make all of our own products and are the original manufacturer of retro treads and risers. Young entered the retro-fit market several years after us but marketed their products with similar names. Our products can only be purchased directly from us or one of several wholesale distribution channels for larger commercial accounts. We find that we can make a much higher quality product, at a better value, and with much better service than through large scale general distribution channels like Young. While Young uses our product names, there are several differences on the treads, with the biggest difference being the pre-attached cove. On the jobsite, pre-attached cove creates significant issues with installation. Pre-attached cove will leave gaps (or "smileys") under each tread unless the sub-tread is cut perfectly square. Separating the moulding from the tread allows gaps and cutting errors to be hidden on the final remodeled staircase.
  4. Q:I had purchased Economy Grade - White Retro Riser, order100033533, SKU#ERIZP14. I would like to know if these risers are still available at the same price.
    Give your answer
Post your question: White Retro Riser - 7-3/4 in x 48 in