Details
Red Oak Golden Oak Retro Stair Tread Closed 11.5 in wide x 36 in long - shipped pre-stained in Golden Oak and then finished with our UV Cured Diamond Coat II - ready to be cut-to-size and installed as soon as you receive them.
Additional Information
| Unit Of Measure | ea |
|---|---|
| SKU | RTCRMGOK-36 |
| Width | 11 1/2 in |
| Color | Golden Oak |
| Length | 36 in |
| Prefinished | Yes |
| Profile | Retro Stair Tread Closed |
| Thickness | 3/4 in |
| Wood Species | Red Oak |
| Quickship Item | Yes |
| Standard Dimensions | View standard tread & riser dimensions |
Customers who purchased this also purchased these items:
Red Oak Golden Oak Landing Tread 36 in
$25.50
|
Red Oak Golden Oak Retro Right Return Stair Tread 42 in
$68.97
|
Pre-primed White Retro Riser- 36 in
$11.81
|
Red Oak Golden Oak Retro Riser 36 in
$34.98
|
Questions on Red Oak Golden Oak Retro Stair Tread Closed 36 in
4 Item(s)
per page
- From Scott at 12/15/09 8:40 PM
-
From Al at 1/1/10 11:16 PM
- Is the Minwax Golden Oak finish on these Retro Stair Treads high gloss? semigloss? satin? What doe "close" mean?
- Our standard UV finish gloss level is a semi-gloss which falls in the range of 50-55. We use the term "closed" when the tread has no returns. Sometimes this type of tread is more commonly called a "box" tread. In short, a closed tread will have a wall or kneewall on both sides of the step, opposed to a left or right return. There is a much better page showing the different styles here:
http://www.stair-treads.com/resources/stair-tread-styles.html - Do you find this question helpful? Yes No
- From Denny at 9/24/10 1:34 PM
-
From lynn at 3/28/11 8:41 PM
- Does this tread come in a thickness less than 3/4"?
Also if I install the tread on the first step the distance from the floor to the top of the first tread would be 8 3/4'" with the rest being 8" is that normal? - 3/4" is the thinnest tread we make. The 3/4" Stair Tread on the first step will not be an issue, since all the treads are being increased by the same amount. You will not be able to feel or see a difference. The very top step will be a little lower, unless you install the Landing Tread. The landing tread is 3/4" thick also, and has a groove in the back for carpet or hardwood to be set in the groove. So all of the steps will be 8 3/4" if you are putting a retro tread on each step.
- Do you find this question helpful? Yes No
- Does this tread come in a thickness less than 3/4"?

View standard tread & riser dimensions



