Red Oak Tongue and Groove Panels for Staircase Landings

SKU
PANEL3
Special Price $217.63 ea was $236.04 ea

Red Oak Tongue and Groove Panels to cover landings, pie steps and other large steps

  • 3/4" thick x 3" wide x 72-94" long S4S T&G
  • Fits together just like 3/4" hardwood flooring
  • Covers approximately 13 square feet per bundle
  • Requires a landing tread (sold separately) for the leading edge
  • Use with our Landing Treads to cover stair landings, pie steps, and other larger areas where flooring would be used
  • Read a blog post on the panel system »
For delivery on 04/08/2024, order this item in the next

Colors shown vary between different devices -
Start your project with a sample pack to pick the right color for your stair remodeling project »»

Note: All real wood exotic species change color greatly over time and may vary in color significantly. Check out our blog post on ambering for more information »

Our Red Oak tongue and groove engineered landing panel systems include individual panels that are ¾" thick x 3" wide with lengths that range from 72" to 94" accommodating the majority of stair landings, pie steps, and kite-shaped steps. The pieces are constructed with a 10 ply base and a wear layer of over 4mm of solid Red Oak. The base plywood results in a product with properties that can withstand variances in climate which often takes its toll on a solid wood product, and with a thick wear layer the benefits and look of solid wood remains present. The most important of those benefits being the ability to refinish if desired. The product is offered in both unfinished and prefinished bundles of 13 square feet. Our prefinished bundles receive the same durable aluminum oxide coating as our treads providing a flawless transition from your beautiful treads to your equally beautiful landing making this system the best answer for converting your carpet covered landing to hardwood.

Red Oak Tongue and Groove Panels 3/4" thick x 3" wide x 72-94" long S4S T&G

We've improved our unique panel system designed specifically to cover larger intermediate landings, kite-shaped steps, and pie steps. Using a multi-panel system that you assemble on site allows you to cover areas of your staircase that were previously too large to cover with a single stair tread.

In the past, the only way to address a landing was to install a landing tread along the leading edge of the landing and then fill the space behind it with 3/4" solid hardwood flooring, but we've designed a new way to retro-fit a previously carpeted landing with a durable and more stable engineered wood product! Using our engineered panel system with your new retro-fit stair treads guarantees a great match in both color and finish between your landing and the rest of the staircase.

This landing system will require a standard 5 1/4" landing tread (sold separately @ landing tread) that can be installed along the leading edge of the landing and our tongue and groove panels behind it. Each panel is grooved on one long edge and has a matching tongue on the other so the two will interlock with each other as well as the landing tread.

Measuring a System

To determine the proper material to order, you'll need to know the length and width of your landing or pie-shaped step. Multiply those two numbers to calculate your square footage. Our systems are sold in bundles of 14 square feet. As long as the landing or pie step is shorter than 94" (left to right), this will provide the solution to the landing.

You will need to rip the last panel to the exact dimension you need on site.

Panel SKU's:

  • Unfinished: PANEL3-UNFI
  • Butterscotch: PANEL3-BUOK
  • Cherry: PANEL3-CHOK
  • Dark Chocolate: PANEL3-D11
  • Dusk: PANEL3-H8
  • Ebony Clubhouse: PANEL3-EBNY
  • English Leather: PANEL3-E23
  • Golden Oak: PANEL3-MGOK
  • Grand Isle: PANEL3-F3
  • Gunstock: PANEL3-GNOK
  • Greysone: PANEL3-A47
  • Hill Hickory: PANEL3-B33
  • Historic Oak Timber: PANEL3-B48
  • Lowcountry Cordial: PANEL3-B21
  • Lowcountry Toffee: PANEL3-B32
  • Mohawk Gold: PANEL3-H28
  • Natural (Prefinished Clear): PANEL3-NATL
  • Saddle: PANEL3-SAOK
  • Smoke: PANEL3-H15
ColorStain Grade
Unit Of Measureea
PrefinishedAvailable
Wood SpeciesRed Oak
Quickship ItemNo
Your Rating
Product Questions and Answers
  1. Q:We are interested in the white oak prefinished "clear" treads, but see that your landing panels are only available in red-oak. Would the red oak prefinished "clear" be a close enough match?
    A:Our landing panel system is currently only available in Red Oak. If you are wanting White Oak or any other Species for your treads we will be more than happy to assist you by sourcing matching flooring that you can use to cover the landings. Please contact us today for an estimate. You can call our toll free number at 1-866-429-0979. Thank you in advance, Danielle Hyman Sales Manager

    Danielle Hyman

    Read other answers
  2. Q:If the panels and landing tread are tongue and groove and I have to rip one of the panels to fit, how do I join the ripped panel to the tongue/groove panel?
    A:It's generally best to install the ripped panel closest to the wall so the ripped edge is against the wall and a full width board is next to the landing tread. If that's not an option, the boards can actually be installed without the tongue or groove since the adhesive will do most of the holding. Shoot a couple finish nails in the far edges to hold the ripped board in place while the glue sets. Nailing at the far edge allows the nail hole to be hidden by quarter round along the perimeter after the landing is installed.
  3. Q:How are the tongue and groove engineered landing panels ( 3/4" x 3") installed is it glued down or nailed down?
    A:We recommend using PL Premium adhesive under the individual boards and nailing the tongues of the boards to hold them in place while the glue sets. If space is tight, the boards can be face nailed and puttied with a touch up crayon afterwards. Touch Up Sticks: http://www.stair-treads.com/instructions-how-to/how-to-use-wood-filler-sticks.html PL Premium: http://www.stair-treads.com/recommended-adhesives You may also want to check out a blog post one of our employees wrote about their installation: http://www.stair-treads.com/blog/installing-my-stairs-phase-three/ Installation video: http://www.stair-treads.com/instructions-how-to/installation-video.html
  4. Q:i have a landing 45.5 deep and 54in wide..I am getting the bullnose in the 54in ..how many panels of the tougue and groove panel I would need...2,457ins
    A:Your landing is roughly 18 square feet by the dimensions you give. The panel system is designed to cover 14 square feet per carton (up to approximately 42"x42" square landing) so you would need 2 cartons and one landing tread to cover your landing.
  5. Q:can the unfinished red oak be sanded and stained?/
    A:Absolutely, the unfinished option is intended to be sanded/stained/finished to a color of your choosing
  6. Q:Do I use this over a plywood stair landing or do I take out the plywood stair landing out ?
    A:The panels will need to be installed over the plywood subfloor. They are not a standalone product.
  7. Q:if I am purchasing traditional treads rather than retro ones (completely ripping out old treads) can I still use this panel system for the landing. I understand I will still need a subfloor, just wondering it this would look sort of odd?thank you!
    A:Yes - this system can be used with either traditional or retro treads since it is installed over the plywood in a landing. Once installed, there should not be a noticeable difference whether traditional or retro treads were used on the steps since both profiles have a 1" bullnose like the 5-1/4" landing treads.
  8. Q:At 14 sq/ft two panels are is not quite enough to finish my 30 sq/ft landing (93” x 46”). Can I purchase additional individual boards, or is this only sold as a full bundle?
    A:Our T&G panel system is typically sold in full bundles only but in some cases, we may be able to offer half-bundle increments. For custom material quotes, please call us at (866) 429-0979 to get in touch with a sales rep for your particular requirements on this project
Post your question: Red Oak Tongue and Groove Panels for Staircase Landings