Red Oak Unfinished Traditional Stair Tread Closed 36 in

SKU
STCRUNFI-36
Special Price $23.06 ea was $29.87 ea
Unfinished Red Oak Stair Treads - Closed - 1" x 11-1/2" x 36"
For shipment before 04/12/2024, order this item in the next

Colors shown vary between different devices -
Start your project with a sample pack to pick the right color for your stair remodeling project »»

Note: All real wood exotic species change color greatly over time and may vary in color significantly. Check out our blog post on ambering for more information »

Red Oak Unfinished Stair Treads - Standard Box Tread - 1" x 11 1/2" x 36"

Our stain grade Red Oak stair treads are made from 100% solid FAS and Select Grade Red Oak (no thin veneers or finger-joints). Use unfinished treads to apply your own stain and polyurethane on site - some degree of sanding and minor prep-work should be expected.

All our box treads (for a "closed-type" staircase) have a full round over bullnose along the front edge and are edge-glued for stability throughout the tread's lifetime. If you need a Red Oak tread with a return, see left return Red Oak treads or right return Red Oak treads. Unfinished Red Oak stair treads require finishing to be done on site; we also offer prefinished Red Oak treads with our UV top coat applied. Traditional Red Oak stair treads are 1" thick x 11.5" wide x 36" long. These treads are sometimes identified by their part number - 8070 Red Oak Plain Stair Tread.

We manufacture these treads to order (right here in South Carolina - 100% Made in the USA) and complete most orders within a week, but this tread length is a hot mover and is typically in stock. If you have a deadline - please contact us and we'll prioritize your order.

Order in larger quantities for a better price per tread and to save on shipping costs. We've set price breaks at certain quantities (noted above), all you have to do is add at least that number to you shopping cart and the price will be automatically reduced.

Whether you're a homeowner looking for an economical choice in a quality Red Oak tread or a contractor looking to stock up on a great buy, grab these treads while we're offing these price breaks because pricing is subject to change at any time. These Red Oak treads are intended for interior use only.

For other quantity discounts on Red Oak stair treads, see these sizes:

ColorUnfinished
Unit Of Measureea
Width11-1/2 in
Length36 in
PrefinishedNo
ProfileTraditional Stair Tread Closed
Thickness1 in
Wood SpeciesRed Oak
Quickship ItemNo
Your Rating
Product Questions and Answers
  1. Q:what is the width
    A:The width of this tread is 11 1/2" You can see the dimensions of the different types of stair treads and stair parts below! http://www.stair-treads.com/stair-tread-dimensions
  2. Q:Currently my stairs have carpet on them. After tearing up the carpet should I use the "traditional" , 1" thick and 3/4" thick, product or the prefinished thinner pieces? The option of prefinished or unfinished does not matter to me. The traditional treads do not seem to have a "lip" on them at the bullnose for the riser to "hide" under, does this make a difference in how I install them? Thanks
    A:If you are wanted to overlay the existing steps, then you will want to use the Retro Treads which are the 3/4" thick treads. If you are replacing the treads completely you will want to use the 1" thick Traditional Treads. See the link below for info on Traditional Treads vs. Retro Treads. Retro vs. Traditional Treads: http://www.stair-treads.com/resources/what-are-replacement-treads.html
  3. Q:Do you sell treads square-cut (no bullnose)? I am looking for treads and risers that fit together to create an unbroken sawtooth pattern as seen from the side. Ideally the visible 1" face of the tread (the nose) would be beveled inward by a slight amount and the riser top edge beveled by an equal and complementary amount so as to achieve an effective nosing of about 1". I recognize you probably don't sell this kind of product but do you sell square-cut nose treads?
    A:Alan, We do sell square-cut nose treads but we will need accurate dimensions of the treads in order to manufacture them. A square cut stair tread is considered a special products so you will need to receive special pricing for this type of a stair. Please provide us with accurate dimensions two Treads are needing and I will have one of our expect staff members prepare the quote for you.
  4. Q:How much overhang should the tread be on a step.
    A:1 1/4" is the standard overhang on our retro stair treads. Traditional treads will also have a 1 1/4" overhang.
  5. Q:Could you tell me if your red oak treads are made with select oak? I am seeking treads without deep grain as I am interested in staining a warm color and do not want to have heavy dark stained areas. Thank you
    A:Our oak treads are select grade oak. They are great for staining since the mineral and grain pattern is very light.
  6. Q:Our unfinished stairs are circular and each tread measures 10 1/2" wide at the narrow left-hand side, 16" at the wider right-hand side, are 35 1/2" long, and the 1 1/8" plywood the stairs was made of has a 1" overhang at the outside of it. These stairs go from the main floor that we just installed Bellawood red oak flooring on to the basement. The main floor sheetrock-enclosed walls around it begin with a door to the basement and a very small landing that extends under the door from the main floor on an angle. We are doing it ourselves to keep down costs. Do you sell treads for circular stairs the size of ours? Thank you for any advise you can give us. Janet
    A:Thank you for your inquiry. We do make custom sized treads. We would be more than happy to put together an estimate for you. Please contact us direct at 1-866-429-0979 so that we can get the number of treads you need, a shipping address and pictures of the current staircase.

    Danielle Hyman

    Read other answers
  7. Q: Currently my closed in portion of stair treads are carpeted. The 5 steps that are open are in red oak and appear to be 1" thick with a bull nose. I have 10 stairs that need treads instead of the carpet and they are 36" wide. What thickness should I purchase and which style? We will be refinishing all of our hardwoods so these would be unfinished.
    A:Either one of our profiles will work. The retro tread is 3/4 in thick and has a 1 inch bullnose on the front. Our traditional treads are 1 inch thick with the bullnose as well. The traditional treads are used if you are replacing the step. The retro treads are used if you are going to put the tread on top of what is currently there. If you have any other questions, please contact us at 1-866-429-0979.

    Danielle Hyman

    Read other answers
  8. Q:How many stringers are needed for a 36" wide stairway? It will have solid risers.
    A:Thank you for your inquiry. We specialize in the material aspect of a staircase. Depending on the structure the answer that you are wanting may vary. If you would like to send over some photos I would be more than happy to take a look. I can be reached direct at 678-228-8689 or via email dhyman@stair-treads.com.

    Danielle Hyman

    Read other answers
Post your question: Red Oak Unfinished Traditional Stair Tread Closed 36 in