Red Oak Gunstock Retro Stair Tread Closed 36 in

SKU
RTCRGNOK-36
Special Price $48.79 ea was $57.43 ea
Red Oak Gunstock Retro Stair Tread Closed 36" wide - Prefinished and ready to install - No staining or finishing required.
Use for overlaying an existing closed staircase with a wall on both sides.
For shipment before 04/17/2024, order this item in the next

Colors shown vary between different devices -
Start your project with a sample pack to pick the right color for your stair remodeling project »»

Note: All real wood exotic species change color greatly over time and may vary in color significantly. Check out our blog post on ambering for more information »

Red Oak Gunstock Retro Stair Tread Closed 11.5 in wide x 36 in long - shipped pre-stained in Gunstock and then finished with our UV Cured Diamond Coat II - ready to be cut-to-size and installed as soon as you receive them.
ColorGunstock
Unit Of Measureea
Width11-1/2 in
Length36 in
PrefinishedYes
ProfileRetro Stair Tread Closed
Thickness3/4 in
Wood SpeciesRed Oak
Quickship ItemNo
Your Rating
Product Questions and Answers
  1. Q:I have gunstock flooring from Bruce, will this gunstock tread match the flooring I have?
    A:Bruce has several different products that use the same stain names as our products - in our experience, these flooring lines are not all the same color, however (i.e. Bruce's Dundee Plank, Gunstock and Bruce's Natural Reflections, Gunstock are two completely different colors). Our stains may crossover to several of Bruce's colors but the only way to be certain is to compare our stain colors with your particular hardwood flooring. Other flooring brands use similar names as well and our colors match many of these brands. We strongly encourage you to verify the colors first-hand before placing an order because all colors do vary slightly from run-lot to run-lot on the flooring as well as our treads. We do have a small charge for all our samples to help us cover the shipping costs but we include a coupon with every sample pack to refund those costs and encourage you to confirm the stain color before ordering. See this link for the Oak sample pack with all 7 stain colors: http://www.stair-treads.com/red-oak-stain-colors-sample-pack.html
  2. Q:I have a big step in the middle of a stair, size 36 by 44, what should I buy to cover that area? I have Bruce hardwood floor CB924, couldn't figure for sure if it's gunstock color or not so does your gunstock color match with that?
    A:Bruce has several different products that use the same stain names as our products - in our experience, these flooring lines are not all the same color, however (i.e. Bruce's Dundee Plank, Gunstock and Bruce's Natural Reflections, Gunstock are two completely different colors). Our stains may crossover to several of Bruce's colors but the only way to be certain is to compare our stain colors with your particular hardwood flooring. Other flooring brands use similar names as well and our colors match many of these brands. We strongly encourage you to verify the colors first-hand before placing an order because all colors do vary slightly from run-lot to run-lot on the flooring as well as our treads. We do have a small charge for all our samples to help us cover the shipping costs but we include a coupon with every sample pack to refund those costs and encourage you to confirm the stain color before ordering. See this link for the Oak sample pack with all 7 stain colors: http://www.stair-treads.com/red-oak-stain-colors-sample-pack.html Regarding the landing in the middle of your staircase, we recommend our landing panel system. With this system, you use a bullnose along the leading edge and 11" wide panels to fill the space behind it. See: http://www.stair-treads.com/moulding-and-accessories/landing-panel-system.html Alternatively, you can install a landing tread along the edge of the landing and filling the space behind it with your prefinished flooring. Sometimes landing tread can be called a stairnose or bullnose. For landing tread, see: http://www.stair-treads.com/moulding-and-accessories/5-1-4-landing-tread.html?color=84
  3. Q:Some of my threads are a 1/4" over 36" will your 36" thread be cut long?
    A:We can only guarantee that the treads will be 36" long - in your case we strongly recommend moving to the 42" tread. If your existing treads are not perfectly square, they may require more than the 1/4" of extra material. A longer tread will be much easier to cut to the required dimensions in the field and can reduce installation headaches.
  4. Q:The County building code requires the all stair treads be of solid wood. Can you verify if they solid wood?
    A:Yes, This tread is solid oak. No veneers or different core material.
  5. Q:What type of finish is used? Is it comparable to the Bruce Dura-Luster Plus?
    A:Here is a link to our finishing page: http://www.stair-treads.com/diamond-coat-ii Our products are finished using the latest technology and are coated with a UV cured Aluminum Oxide finish. We *strongly* recommend you first order a refundable sample pack to compare our stain colors to your flooring because stain colors may shift over time and from run-lot to run-lot on both the flooring and our treads. For the Red Oak sample pack see this page: http://www.stair-treads.com/red-oak-stain-colors-sample-pack.html
  6. Q:Do you carry a gunstock color riser for the back of the stair? If so, what are the dimensions?
    A:We do carry the Gunstock Retro Risers. You can find them at the link below. The dimensions of the risers is 1/4" thick x 7 1/4" wide. Gunstock Retro Risers: http://www.stair-treads.com/url/Hb
  7. Q:How wide are these treads?
    A:These treads are 11-1/2" wide
  8. Q:Can I order a sample of the red oak gunstock? I need to compare color with existing floor. Please let me know
    A:You can order a red oak sample pack. The SKU: 1sampmulti. The sample pack is $19.95 and includes shipping anywhere in the United States. The best part is, once you place an order over $300.00 we will credit you $20.00 for purchasing a sample. If you have any further questions please contact us at 1-866-429-0979.

    Danielle Hyman

    Read other answers
  9. Q:The price listed is for how many riser
    A:The price listed is per riser. If you would like us to put together an estimate to make sure that you have the best price, please contact us at 1-866-429-0979.

    Danielle Hyman

    Read other answers
Post your question: Red Oak Gunstock Retro Stair Tread Closed 36 in