3009 Newel Post Fastener Kit (L-Bracket Kit) for 3 in Newel

3009 Newel Post attachment kit (J-bracket) - includes Oak trim either unfinished or prefinished

4Js Secrets to Post Anchoring

• Designed to cause downward pressure to post.
• Year after year delivers a stored energy to prevent a post from loosening.
• Built-in cleats along the bottom edge, prevents post shifting.
• Zinc-Plated for interior or exterior use (Note: Oak trim is NOT intended for exterior use).
• Mount newel posts without drilling difficult holes required with the traditional newel nut and bolt method
• Can be installed to subfloor or over existing floorcovering providing it is sufficiently stable

Easily Install New Post – or Use to Repair Old Post

1. Position 4Js bracket flush with bottom post. Mark & drill holes for small screws on all 4 sides of post. Use small screws to attach 4Js brackets to post.
2. Set post in desired location and mark & drill holes for large screws. Use large screws to attach 4Js brackets to floor.
3. Glue corners of mouldings, place around post and use masking tape to hold until dry.

Alternative Part Numbers: 3505 3505-312 NEWEL-ATTACH-KIT O3505-312 O3503-3 3505 3505-312-OA