Red Oak Single Turnout Starter Step

SKU
SSR
$152.73 ea

Red Oak starting tread with a single rounded edge along the left or right side. This starting tread will have one semi-circular curve along the left or right side and may be installed below a "bird cage" or the handrail volute.

  • 1" thick x 11-1/2"
  • Available in whole foot increments
  • Cut exact dimensions on site
  • See our standard dimensions for detailed measurements - contact us for custom starter steps
  • 48" Minimum length
  • Also available in: 48", 60", 72", 84", & 96" lengths

This Red Oak starting step is available unfinished or prefinished - natural or choose from one of our stain colors.

For shipment before 07/18/2025, order this item in the next

Order a wood sample pack » to ensure the color on your device accurately represents the color of your new stair treads. Seeing the stain colors in your home's lighting allows you to select the best stain color to coordinate with the design and color pallet in your home. A finished sample of any of our wood species can also be ordered individually.

When each sample order ships, we'll email a $20 coupon code that can be applied to your next purchase at Stair-Treads.com over $300.

The red oak sample pack contains 2 pieces of each stain color to show the expected color range of each stain. For species other than red oak, the sample pack contains one piece, roughly 8" x 11-1/2" sample of the wood species.

Starting steps as their name implies, is the first stair at the bottom of a staircase. This step starts your ascend upstairs and there is typically only one per staircase (unless you have multiple runs). A single turnout starter step is curved on one side (also called a volute) and is square on the walled end. Left and right are relative as you face the step.

Note: Starter treads and starter risers are sold separately. Order a standard starter riser with this tread - the shapes of tread and riser will match each other and will allow a 1-1/4" overhang on the appropriate sides.
See Matching Starting Step Risers.

Our standard left or right turnout starter steps have a single rounded edge along the left or right sides that make a 1/2 circle turn on one side - also called a volute or turnout. This starting tread will have one gentle curve along the left or right sides and is thus called a "single quarter turn" tread.

The measurement of the notch or cutout on this type of tread is called the "Throat Length".

ColorStain Grade
Unit Of Measureea
Width11-1/2 in
PrefinishedAvailable
ProfileSingle Turnout Starter Step
Thickness1 in
Wood SpeciesRed Oak
Quickship ItemNo
Your Rating
Product Questions and Answers
  1. Q:Can I get the red oak single turnout starter tread in 3/4" thickness? The 1" thickness is inconsistent with the 3/4" Retro Treads and will make my stair heights vary 5/8",
    A:Yes, you can get the single turnout starter step in 3/4" thickness, but the 3/4" bullnose will not look the same as the Retro Treads that have a 1" bullnose with a 3/4" tread body. Alternatively, since you will be removing the old starter step entirely, we suggest using a 1" thick starter step with a starter riser that is 1/4" shorter than the rest to accommodate the variance.
  2. Q:Could you be more specific about "left Turnout" vs. "right turnout?" For example, if I am standing on the first floor and facing the stairs going upstairs, if the turnout is on the right-hand side, is it "right turnout?" Thank you.
    A:When you are standing at the bottom of the staircase looking up the turnout would be on the exposed side. If there is a wall on the left side and it is open on the right you will want a right turnout. For more information please see the following link. http://www.stair-treads.com/resources/stair-tread-styles.html If you would like for us to put together an estimate please contact us at 1-866-429-0979.

    Danielle Hyman

    Read other answers
  3. Q:Can I get this starter step in a deeper depth than 11.5 inches? I need something more like 13 or 13.5".
    A:Starter steps can be made with custom dimensions. Please contact us with your requirements and we'll create a custom dimension starter step quote for you: https://www.stair-treads.com/contact/
Post your question: Red Oak Single Turnout Starter Step